The dual track system is made up of two single tracks and dual mounting brackets. It is used for both curtains and sheers application. The curtain and the sheet can be set up and operated either independently or grouped together. Each track can be set up to open/close from left to right, right to left, or center to both sides. The motor can be mounted on either left or right side. The dual track can be mounted anywhere on the ceiling or on the wall with adjustable off wall distances between 0.25" to 3.25" for the inner track (usually used for sheers), and between 2.5" to 5.5" for the outer track (usually used for curtains). The track system can be used for straight line windows, bay windows, corner windows, and any custom curved windows. The two motors can be plugged into your wall outlet or hard wired into your electrical box. It can be operated by one multiple channel remote, timer, wall switch, any dry-contact-relay controller, smartphone with an add-on hub, and voice-controlled by Google assistant or Amazon Alexa with an add-on hub (contact METechs with the hub).
Note: If you try to set up the tracks to cover bay windows and corner windows, you have to order curved tracks separately. The 135-degree curved tracks work for most bay windows and require the straight track kit and four 135-degree curved tracks. The 90-degree curved tracks work for corner window applications and require this straight track kit and two 90-degree section.
Features
- Can be used for bay windows or corner windows with optional curved tracks(sold separately)
- Automatically program fully open/close two end positions; no limited switch setup
- Can set any position as your favorite position (a position between fully open/close position)
- The motor will intelligently continue to finish opening/closing draperies when starting to open/close draperies by hand
- Can be operated by a remote, timer, wall switch, smartphone, and any other dry-contact-relay controller
- Can be voice controlled by Google Assistant or Amazon Alexa with smartphone add-on hub
- Can be operated by hand when power is off
- Slow start/stop, runs smoothly, precisely, and ultra-quietly
- Overload and jam protection
Specifications
- Operation voltage: 110VAC to 240VAC
- Output power: <48W
- Rated torque: 2n.m
- Rated RPM: 100~120
- Rated currency: 2.3A @ 24VDC
- Frequency: 433.92MHz/863MHZ
Curtain loading chart (unit is Kgs):
Optional Accessories
Package Content
- Two CL200BT motor
- Selected size tracks with carriers and drive belt
- One 6-channel RF remote
- Mounting brackets
Order tips:
- The track can be cut down to fit the measurements of your project; just order the next longer size track than you need. Mount hardware and remote control are included in the package; this is a ready-to-go kit! Curtains or draperies are not included.
- For bay windows and corner windows, order one straight track. The straight track length should be the next longer size than the total length of your coverage, and then order required curved tracks. For example, if you have bay window measured as left 50, center 90, and right 50, you need order one 198 (198>50+90+50=190) straight track and another order of four 135-degree curved tracks. Try to make note of bay windows 50-90-50 when you place the order.
